Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
2421
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
PA20° Module m1 Standard Involute Gear Hob
PA20° Module m1 Standard Involute Gear HobTooth profile: DIN3972-2 standard, GBMaterial：HSS M2, M35,... - PA30° DIN5480 Involute Spline Hob with Module m10
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
- Timing Pulley Hob for (AT.)D.T (D)T5
- PA20° Profile DIN3972 Standard Gear Hobbing Tool with Module m3.25
- PA20° Standard Gear Milling Cutter with Module m1.25
- PA30° DIN5480 Involute Spline Hob Cutter with Module m6
