ISO 4468:2009 Gear hobs-GB/T 6084-2016 General technical specification
2022-10-29 08:31:53
jiangxingTools
2530
ISO 4468:2009 Gear hobs-GB/T 6084-2016 General technical specification
gear hob module: m0.5-m1, m1-m2, m2-m3.5, m3.5-m6, m6-m10, m10-m16, m16-m25, m25-m40
accuracy requirement of hobs: AAAA, AAA, AA, A, B
bore: 8mm, 10mm, 13mm, 22mm, 27mm, 32mm, 40mm, 50mm, 60mm, 80mm
number of starts: single, two, three, four, five, multi-starts
material: HSS M2, M35, M42, ASP2052, S390, and Carbide
相關(guān)文章
-
PA20° DP12 Standard Gear Hobber with BPⅡ
PA20° DP12 Standard Gear Hobber with BPⅡdiametral pitch: Dp12, pressure angle: PA20°hob size: OD 55... - RS80 Roller Chain Sprocket Hob with Pitch 25.4 x Roller Dia. 15.88
- PA20° Profile DIN3972 Standard Gear Cutter Hob with Module m3.5
- Dry Cutting Gear Hobs
- HSS M35, M2E Gear Hob Cutter with Module
- PA20° Module m3 Standard Involute Gear Hob
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m6
